Metallurgy

Departments » Metallurgy

Training of specialists in the field of metallurgy at the Tajik Technical University named after acad. M.S. Osimi in foundry and heat treatment of metals. Since 2003 the department of NFMM began to admit students for the specialties 1104-"Foundry manufacture of ferrous and non-ferrous metals" and 1105-"Metallurgy and heat treatment of metals". In 1996 the department of "Non-ferrous metals metallurgy" was formed at the faculty of "Chemical technology and metallurgy" (NFMM). For the first time in 1999, local specialists graduated from the university with a degree in metallurgical engineering 1102-"Non-ferrous metals metallurgy". Then the large Tajik enterprises needed specialists

From 2008 to 2016, the 3 above-mentioned specialties and the Department of NFMM were trained specialists.

In 2016, as a result of the merger of the departments "Mechanical Engineering" and "Chemical Technology and Metallurgy" was organized faculty "Innovative Technologies". As a result of the merger of the departments "Metallurgy of non-ferrous metals and "Technology of electrochemical production" was named the department "Metallurgy". In the same year at the department of "Metallurgy" new specialty 520201 - "Technology and equipment of jewelry industry" was opened.

From 1996 to 2012, the department was headed by Doctor of Chemical Sciences, Professor Dzhuraev T.D. as an experienced teacher, was widely recognized by teachers and students of the university. He regularly provides methodical and pedagogical assistance to young teachers, organizes open classes and makes scientific-methodical reports at national and international conferences, seminars and symposiums.

In the shortest possible time, he set up the first metallurgical graduates in the Republic of Tajikistan. Organized laboratories. Printed study guide and instructions on lectures and method of practical work. More than 150 students defended their qualification work under his leadership, which has scientific and industrial significance. More than 15 students of Prof. Dzhuraev T.D. were awarded the degree of Candidate of Sciences. Professor Dzhuraev T. D. chair is the scientific director of the department. He has published over 500 scientific articles, monographs, inventions and teaching aids. He is the inventor of the symbolic signs of the USSR and the excellent educationalist of the RT. Dzhuraev T.D. takes an active part in public works of the university. Currently, he is a member of the dissertation council at the Tajik Technical University named after acad. M.S. Osimi.

From January 1, 2013 to 2021, the department was headed by Candidate of Chemical Sciences, Associate Professor Muslimov I.Sh. being a rising teacher and university student, he is in great demand. He regularly provides methodical and pedagogical help to young teachers, organizes open lessons, conducts scientific and methodical reports at conferences, seminars and symposiums of the republic and international conferences. More than 140 students defended their qualification work under his guidance, which has production value. Under the guidance of Associate Professor Muslimov I.Sh. 2 postgraduate students received the degree of candidate of sciences. He published more than 120 scientific articles, monographs, inventions and manuals. He is an excellent educator of RT. Muslimov I.Sh. takes an active part in public works of the university. He is currently a member of the dissertation council at the Tajik Technical University named after acad. M.S. Osimi.

Since September 1, 2021 the head of the department is Candidate of Chemical Sciences, associate professor Rakhimov F.K. From the beginning of his work began as an assistant and worked as a senior lecturer, registrar of the department "Chemical technology and metallurgy" in the registration and consultation center of credit system education methodologist training department, doctoral candidate and assistant professor of the department "Metallurgy". Currently works as the head of the Department of Metallurgy.

Rakhimov F.K. as an experienced teacher has a special place among teachers and students of the university, regularly provides methodological assistance to young teachers and makes scientific and methodological presentations at national conferences and seminars. Rakhimov F.K. is the author (co-author) of more than 90 scientific works, including scientific articles, monographs, patents and educational and methodical work. It is important to note that at present he has a doctoral PhD under his supervision.

Now the department "Metallurgy" prepares specialists in 3 specialties:

420101-0101-"Foundry Production of Ferrous and Non-Ferrous Metals";

420101-0104- "Nonferrous metals metallurgy";

520201 - "Technology and equipment of jewelry industry".

Already more than 1000 graduates of the department work in domestic metallurgical enterprises, including JSC "Tajik Aluminum Company", LLC TalCo, joint ventures "Zarafshon", "Aprelevka", "Anzob", "Takob", "Pakrud", and in metallurgical enterprises abroad.

Highly qualified specialists have worked and are working in the chair: Academician of International Academy of Engineering, Laureate of State Prize named after Avicenna, Ph, Professor A.V. Vakhobov, Academician of International Academy of Engineering, Doctor of Chemical Sciences, Professor T.D. Dzhuraev, Professor M.S. Pulatov, Doctor of Chemical Sciences, Professor Z.A. Zinchenko, Candidate of Technical Sciences, A.S. Murodyon, Doctor of Technical Sciences, Professor H.M. Nazarov, Candidate of Chemical Sciences, Associate Professor Z.M. Karieva; Associate Professor D. Nuraliev; Associate Professor M.B. Akramov; Associate Professors E.R. Gazizova, I.Sh. Muslimov and F.K. Rakhimov; M.I. Khalimova, PhD in Chemistry, Acting Associate Professor acting associate professor Toshev M.T. and Khojaev F.K., candidate of technical science, senior lecturer Akhmedov M.Ch.; senior lecturers Ismoilov R.A., Ismoilov I.R., Nimonov R.A.; assistants Khojiev G.K. and Olimshoeva S.R., RhD-doctor Mirzoeva B.M., etc.

Currently, the Department of Metallurgy carries out research work in two areas:

Physico-chemical bases of development of composites and alloys on the basis of non-ferrous metals, their production and application.

Physico-chemical bases of heredity in inorganic nature.

On the above directions under the scientific leadership of Professor Dzhurayev T.D. together with Professors Hakdodov M.M., Lebedev V.A. and Associate Professors Khudoberdiyev V.G., Muslimov I.S. and Gazizova E.R. defended their PhD theses:

Gazizova E.R. on "Heritability and its manifestation in alloys based on systems Al-Si, Al-Mg and Al-Mg-Zn" in 2009.

A. Muminov on the theme: "State diagrams and thermodynamic properties of barium-based alloys" in 2010.

Ahmedov M.C. on the theme: "Thermodynamic properties of Mg-Al, Mg-Y and Mg-Nd alloys and kinetics of cathodic processes in relation to the electrolytic preparation of ligatures" in 2011.

Muslimov I.Sh. on the topic: "The interaction of lithium with aluminum and rare earth metals and the development of alloys based on them" in 2011.

Khalimova M.I. on the topic: "Interaction of beryllium with aluminum and rare-earth metals and the development of alloys based on them" in 2015.

Rakhimov F.K. on the topic: "State diagrams and thermodynamic properties of europium and ytterbium-based alloys" in 2015.

Toshev M.T. on the topic: "Elements-creators of hereditary traits and their influence on the properties of metals and alloys" in 2018.

Khojaev F.K. on the topic: "State diagrams and thermodynamic properties of lead-based alloys" in 2019.

I.R. Ismoilov on the topic: "State diagrams and thermodynamics of magnesium alloys" in 2021.

Under the scientific advice of Dr. Chemical Sciences, Professor Dzhuraev T.D. Muslimov I.Sh., Rakhimov F.K. and Toshev M.T. are preparing their doctoral theses.

Under the scientific advising of Doctor of Chemical Sciences, Professor Dzhurayev T.D. Muslimov I.Sh., Rakhimov F.K. and Toshev M.T. are preparing their doctoral dissertations.

The department "Metallurgy" has research ties with the following foreign countries and their organizations:

Moscow Power Engineering Institute, Department of "Technology of Metals" (Doctor of Technical Sciences, professor Karimbekov M.A.).

Moscow National Research Institute (MISIS).

Samara State Technical University, Department "Foundry and High Performance Technologies" (Ph.D. in Chemistry, Professor Nikitin V.I.).

Buryat Scientific Center of Siberian Branch of Russian Academy of Sciences, sector of computer aided design of materials (Dr. Sci., Prof. V.I. Lutsyk).

Scientific and industrial relations of the department.

Department of "Metallurgy" on education and science has scientific and industrial connections, national and foreign enterprises:

Moscow Power Engineering Institute, Department of "Technology of Metals" (doctor of technical sciences, professor Karimbekov M. A.).

Moscow National Research Institute (MISIS).

Samara State Technical University, Department "Foundry and High Performance Technologies" (Ph.D. in Chemistry, Professor Nikitin V.I.).

Buryat Scientific Center of the Siberian Branch of the Russian Academy of Sciences, Department of Computer Aided Design of Materials (Prof. V.I. Lutsyk).

Tajik State Pedagogical University, Department of General and Inorganic Chemistry;

Nikitin Institute of Chemistry. V.I. Nikitin Institute of Chemistry.

Agency for Nuclear and Radiation Safety under the National Academy of Sciences of Tajikistan;

Tajik National University, Department of physical chemistry;

Open Joint Stock Company Tajik Aluminum Company (OJSC "TalCo");

State Unitary Enterprise "Tamohush" Isfara hydrometallurgical plant;

State Scientific and Experimental and Production Institution NAST;

Zarafshon Joint Venture;

Joint Venture "Aprelevka";

Anzob Joint Venture;

Joint Venture "Tacob".

Faculty members